1/4ģ14.17(B) When Type NM cable is used with nonmetallic boxes not larger than 2 1/4 x 4 in., securing the cable to the box shall not be required if the cable is fastened within _ in. inside the box and beyond any cable clamp. splicesģ14.16(C)(3) Where nonmetallic-sheathed cable or multiconductor Type UF cable is used, the sheath shall extend not less than _ in. Trueģ14.16(C)(2) Short-radius conduit bodies such as capped elbows and service-entrance elbows that enclose conductors 6 AWG or smaller shall not contain _. Falseģ14.16(C)(1) Conduit bodies that are durably and legibly marked by the manufacturer with their volume can contain splices, taps, or devices. singleģ14.16(B)(5) Conduit bodies containing conductors larger than 6 AWG shall have a cross-sectional area at least twice that of the largest conduit to which they can be attached. doubleģ14.16(B)(4) Where one or more equipment grounding conductors enter a box, a _ volume allowance in accordance with Table 314.16(B) shall be made based on the largest equipment grounding conductor. device box shall have _ volume allowances provided for each gang required for mounting. doubleģ14.16(B)(4) A device or utilization equipment wider than a single 2 in. gangģ14.16(B)(4) Each strap containing one or more devices shall count as a _ volume allowance in accordance with Table 314.16(B), based on the largest conductor connected to a device(s) or equipment supported by the strap. singleģ14.16(B)(3) For the purposes of determining box fill, each device or utilization equipment in the box which is wider than a single device box counts as two conductors for each _ required for the mounting. Trueģ14.16(B)(2) Where a luminaire stud or hickey is present in the box, a _ volume allowance in accordance with Table 314.16(B) shall be made for each type of fitting, based on the largest conductor present in the box.
Where one or more internal cable clamps are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made based on the largest conductor present in the box.
0 kommentar(er)
